51

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the new feature:
- Resource content export: now it's possible to export resource data like geofences, drivers, notifications and etc in the .csv format.

Diana Cheley
Wialon Hosting Expert
Gurtam
52

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the new feature:
- Units search on the monitoring panel: new filters - now unit can be found using the following filters: unit name, unique unit ID, unit's group name, profile fields, device type.

Diana Cheley
Wialon Hosting Expert
Gurtam
53

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the following features:
- The ride track from group report : now it's possible to mark the selected trip interval with a red line and center on the map, if options 'Trip routes' or 'All messages' are enabled
- Integration with Naama map service from Iran: now it supports Naama maps with provided map key - routing and reverse geocoding features
- Retaining Locator settings : if Internet connection is lost while users are viewing the data trough Locator link, or user had to close link and then re-open it, the map will scale taking into account the previously selected settings.

Diana Cheley
Wialon Hosting Expert
Gurtam
54

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the new features:

- New column in Order report: "Arrival time" showing the actual time when the courier entered the order geofence.
- Coordinates adjustments on the Amap maps : the correction option  'Use Chines coordinates' can be  activated on user settings if Amap maps are selected.
-  Enhancements of the reports by geofence: new filtration types (by duration, mileage, speed, driver/trailer, parking, stops); new columns ("Trailer", "Geofence name") and also information of temperature/weight sensors, fuel consumption, and counters.
- Viewing the photo through the external link.

Diana Cheley
Wialon Hosting Expert
Gurtam
55

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the following features :

- Interface improvement: we have changed the layout of some blocks - top navigation panel, work list, bottom information panel, dialog boxes, out-of-blocks area
- Geofences sorting while rendering : large circle (polygon) geofences are located below smaller ones; line geofences are always higher than other goefences.
- New service in CMS: service "Activated units" allows billing only for active units, excluding deactivated ones.
- Search by phone number in the work list
- OAuth 2.0 support for HERE maps : it's possible to connect HERE maps via Token Credentials which HERE introduced recently.

Diana Cheley
Wialon Hosting Expert
Gurtam
56

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the following features:

- Adding a converter to calculator: now it's possible to get the duration value in a user-friendly formats: hours:minutes:seconds, as well as in the date and time format.

- The report interval beginning/end : there are new time constant in calculator which allows to use report time interval (begin, end, interval in days, in hours)

- The calculator design improvement : it has been optimised the work with formulas - more space for the formula, the whole formula is visible despite its length.

Diana Cheley
Wialon Hosting Expert
Gurtam
57

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the following features:

- Dashboard :
- now it's possible to set up any custom period to get data or apply one of the default period (today, yesterday, week, month)
- improve the Mileage and Fuel Consumed bu FLS blocks : now it's possible to add 10 units, also there is new line charts

- Filtration criteria on Access tab at element's settings : now it's possible to filter items in the list by their creator's name, resource's name, unique ID group name and etc.

- New Gurtam (Webgis) Maps Layers : we have added 2 new styles for maps, in vector format :
- Gurtam Maps Vector (Beta) looks the same as the current Gurtam Maps
- Gurtam Maps Vector Modern Style (Beta) is a updated and attractive one.
Apart from the fancy appearance, the new vector styles load faster and allow adding new useful features in future.

Diana Cheley
Wialon Hosting Expert
Gurtam
58

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the several features update :

- New Webgis Maps layers : last month, we released two new map styles: Webgis Maps Vector and Webgis Maps Vector modern style. And both are vector ones. You will see an extended list of maps and layers right after logging in. The new map styles will be tagged as New. Thus, it will be much easier to find and apply the updated settings.

- The latest API version support by the VIN decoder : we updated the current API 2.0 to the 3.1. As a result, now while decoding the vehicle’s VIN, you’ll get even more fields on the Profile tab automatically filled with essential unit information.

Diana Cheley
Wialon Hosting Expert
Gurtam
59

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the new features update :

- We have added the ability to leave feedback on the Dashboard and vector maps functionality.

Sometimes your clients would like to suggest some improvements. To allow them to share their opinion directly and without leaving the platform, we have launched a tool to collect their feedback.

So, on the Dashboard page and vector maps, they will see an icon to enable a mini-survey on these options' work. The Dashboard tab is a feature that system users have been working with for only a year. To develop this tool, we must understand what data is missing. With the new option, clients will be able to inform us without leaving the Dashboard tab.

Diana Cheley
Wialon Hosting Expert
Gurtam
60

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Counters’ refinement is the new feature released at last update.
We released a refinement for counters. Now the relative sensors' values (relative odometer, relative engine hours) can be used from the previous message. It means that if the mileage and/or engine hours counter is set to a relative sensor, then the values   from the previous message can be used in the parameters.

Diana Cheley
Wialon Hosting Expert
Gurtam
61

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

This week we've released the following features :

- New blocks on Dashboard

There are 2 new blocks: Top units by fuel consumption and Top units by mileage.
The first block displays units from the Monitoring tab with the maximum fuel consumption by FLS for the specified period. The second block displays units from the Monitoring tab with the maximum mileage for the specified period.

- Events with regard to "Timeout"  in mobile apps

Previously, the ignition sensor's Timeout value was not considered when calculating the events in the mobile app for Android and iOS. It could lead to the data difference in reports in the system’s web-version and a mobile app. Now, this value is considered, and data is consistent.

Diana Cheley
Wialon Hosting Expert
Gurtam
62

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the following features :

Relocation of the fuel consumption settings to the fuel sensors settings

For you to be able to configure and accurately control the fuel consumption for special machinery with several fuel tanks, we relocated the fuel consumption settings to the settings of fuel sensors. It made the configuration process more logical and transparent as everything will be located in a single window (the settings of the needed fuel sensor).

Within this task, we also added the ability to bind sensors to sensors (engine sensors to FLS, engine efficiency sensors to the selected engine sensors), extended the fuel consumption calculation by math for FLS, and сhanged the import and export process both for sensors and entire units, so that you could, for example, import the previously exported units correctly.  Also for the users to get even more information on a unit or group of units, we added new columns about Fuel consumption to several report tables.

Note! Current fuel consumption settings were retained and are now available for viewing and editing in already existing fuel sensors.

We will temporarily keep the Fuel consumption tab. There, we added a detailed tooltip for each setting with its current location in the fuel sensors.

Dashboard enhancements

So that the work with Dashboard was even more smooth, we slightly changed its interface.

Diana Cheley
Wialon Hosting Expert
Gurtam
63

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the following feature:

New filter by geofences in the Images table

We added the filtration by geofences in the Images table. The new function will come in handy when the user needs to download photos for a specific period by each client (if the client is marked on the map as a geofence). Thus, you can view the needed information in the most convenient way.

Application example:
The company provides services and demands completed work proof via sending a photo. Each employee has a tablet with WiaTag installed. The worker sends the before and after work photos with it. To look through these photos conveniently, generate a group report applying geofence and unit filters.

Diana Cheley
Wialon Hosting Expert
Gurtam
64

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Today we've released the following features:

Dashboard in a separate menu tab

Previously, the Dashboard, a tool for tracking the status of units, opened automatically if there were more than 100 units in the work list. That was not always convenient, especially with a large number of objects on the map.

The Dashboard is a separate powerful tool with useful functionality, so now it is placed as a separate tab in the first place of the horizontal menu and no longer opens automatically. The Monitoring tab remains in the same place.

The data in the Dashboard is displayed only for the units that have been added to the work list.

Changes in the sensor properties dialog

Previously, all sensor properties were displayed in an additional dialog, and it took a user a long time to find the necessary properties.

Now we have changed the general view of the list.

First, we have adjusted the order of displaying fields.

Secondly, the window displays only those properties in which you can enter data right away. The fields in the object and report properties that appear upon activating other settings have been removed from the interface.

Improved search results in the Access tab

Previously, a user could search only by the unit name. In summer 2020, we significantly increased the number of search criteria, but the data looked rather chaotic, without any sorting.

We wanted to make the search and its results as comprehensive as possible. Therefore, we have added a drop-down list with search criteria: now a user chooses which parameter to apply.

Highlighting the most suitable property

We have returned the dynamic search function: when a user, creating a sensor, starts to enter the name of a property, the system highlights the most suitable option as he/she is typing, instead of waiting for a complete match.

One more improvement: now dynamic search applies to any parameter in the filter, not just the first one.

Diana Cheley
Wialon Hosting Expert
Gurtam
65

Wialon Hosting Release Notes

Re: Wialon Hosting Release Notes

Good day!

Last update we've released the following features:

Introducing the unit type library

Previously, a Wialon user created unit type names on their own. It was time-consuming, and the name could be incorrect or misspelled. The use of these names in Wialon was very limited: they couldn’t be used to create unit groups, customize the interface, and so on.

We carefully analyzed all the unit type names that our users entered and created a universal library. Now the user does not need to invent anything: in the general unit settings, they select the right unit type from our list. If the selected unit is a vehicle – the user goes further and selects the right vehicle type in the Profile tab. These types will be displayed in the unit properties window, used as a filter in the CMS and in the worklist, applied for generating reports, and added as a new parameter in the calculator.

The data that the user has already entered manually will not be lost – it will be transferred to the Note field.

Unit type selection
In the General tab, a new Unit type field has been added, placed under the Name field. Using it, the user can select among the three unit types:
- Vehicle;
- from the Personal GPS tracker category: Person, Animal, Other;
- from the Stationary object category: Camera, Container, and so on.

Vehicle type selection
For the Vehicle unit type, we have added two fields to the Profile tab with a drop-down list:
- a higher-level field named Vehicle type on the left with values like Cargo transport, Passenger transport, etc.;
- a lower-level field on the right with more detailed characteristics.


For example, the Special machinery vehicle type, selected in the field on the left, allows the user to choose between Tractor, Combine, and a dozen of other types.

Transferring the current unit values
If you have already entered unit type in the settings manually, don’t worry, this data will not be lost. All the current unit values saved in the Vehicle unit type field will be displayed in the Note field. This field is located in the Profile tab and in a pop-up window (if the option is enabled in the user settings).

The Note field has also been added to the calculator and to the report containing profile information. These fields are exported and imported, including data transfer via API. The other applications such as Logistics can access the data contained in them on request.

Setting up a unit on the Video tab

In the unit properties, there is a tab with video settings. The tab is used to view connected cameras, edit their numbers, and rename them. Information about cameras can be updated and changed, so it is important to provide quick and convenient access to their settings.

Besides, the option with video settings is present on all the other tabs associated with the unit.

Therefore, we have aligned it with the rest of the interface.

What we have done:
- the unit properties icon is added on the pages with video streams;
- clicking on the icon displays a dialogue window with the unit properties;
- while the window is open, the stream stops and resumes after the window is closed.

Diana Cheley
Wialon Hosting Expert
Gurtam