Topic: Trips and Tracks: Sensors Adaptation
We have a client that works with tipper and mixer trucks. They have sensors for when both vehicles are deliverying.
So they have a request for using the values of the sensors in the tracks and trips.
a) Knowing if a vehicle has delivered concrete by the tracks of sensors doesn't help because the vehicle basecally doesn't moves when is unloading, so when a vehicle uses a sensor and it's not moving, there is no way to know by the lines of the tracks if it was really activated.
b) Sometimes a vehicle do a trip but doesn't activate any sensor, so if you want to monitor a delivery, you'll have to look for more than one trip to find the place where the unload was done.
a) Create inside Tracks, markers for when a sensor is activated/disabled and the option to choose the sensors to appear (maybe mask for the sensors or just a checkbox).
b) Create a new type of trip detection by digital sensors: Option to consider a trip during the time when the sensor was activated or through the intervals between a sensor activation. You could also set a minimum distance (radius) to avoid considering more than one trip when the vehicle were unloading concrete more than one time in the same client driving a few meters.
Will get the metrics of each delivery separated and will be able to see easily through the maps where the concrete was delivered.
Technical Support, Rastreasul