51

Jimi JC100

Re: Jimi JC100

Добрый день, коллеги.
Подскажите а где есть полный список доступных команд для JC200?
Вообще интересует как сделать блокировку двигателя, какая команда для этого нужна.
Спасибо.

52

Jimi JC100

Re: Jimi JC100

shaggiekeN
Set the petrol/electricity control    RELAY,[A]#       
A=0/1 0 means connection, 1 means cut off default: 0.
RELAY#        Check the status of the control.

Viktor Yarovenko
Hardware department Specialist
53

Jimi JC100

Re: Jimi JC100

yavi wrote:

shaggiekeN
Set the petrol/electricity control    RELAY,[A]#       
A=0/1 0 means connection, 1 means cut off default: 0.
RELAY#        Check the status of the control.


Спасибо Вам большое. Все работает.
А есть ли еще какой нибудь список команд кроме фото видео и блокировки?

54

Jimi JC100

Re: Jimi JC100

shaggiekeN Concox GT06 не уверен что все команды подходят, но что то должно

Viktor Yarovenko
Hardware department Specialist
55

Jimi JC100

Re: Jimi JC100

I am running a Windows 10 Pro machine and cannot get the driver installer or the flash tool to work ...is it compatible with Windows 10?

Phoenix Solusi
Mobile Visible Secure
Specialists in data acquisition and analysis for mobile and fixed assets. Integration in to content management systems is a specialty we have.
56

Jimi JC100

Re: Jimi JC100

Good afternoon, colleagues.
There is a JC200 device. Connected the device to WIALON.
I can not get parameter 1: SOS ALARM. Clicked the Alarm Button. But the parameter does not come.

Tried on two different devices.

57

Jimi JC100

Re: Jimi JC100

molotok Please send all details to hw@gurtam.com (unit id,  exact time when you activated SOS button)

Viktor Yarovenko
Hardware department Specialist
58

Jimi JC100

Re: Jimi JC100

molotok wrote:

Good afternoon, colleagues.
There is a JC200 device. Connected the device to WIALON.
I can not get parameter 1: SOS ALARM. Clicked the Alarm Button. But the parameter does not come.

Tried on two different devices.

By experimental way we realyzed, that SOS button should be pushed during 8+ seconds...
We have no ideas about the reason...

Viktor Yarovenko
Hardware department Specialist
59

Jimi JC100

Re: Jimi JC100

I can´t update FW. The driver was installed correctly, but I have an error (Code 45) “Actually. This device hardware doesn´t connect to the CPU”. Then the SP_Flahs_Tool, can´t be used.

Can you help me?

Ing.  Oscar Muñoz García
IT MANAGER - BLAC SOLUTIONS
12090304 ext. 2019
60

Jimi JC100

Re: Jimi JC100

Most US companies do not allow Flash to be installed due to security risks. There is no way for most US customers to view video if Flash Player is the only option. Changing the device preference to not be flash does not work. Please provide an alternative video player solution.

-Eron
Skype: eron.iler
Fleetistics.com
61

Jimi JC100

Re: Jimi JC100

eron.iler At this time flash player is required.
We'll try to develop new video solution during 2020 but there are no any other details at this time.

Viktor Yarovenko
Hardware department Specialist