1

➤ CalAmp

(edited by shev 19/02/2015 16:15:01)

Topic: ➤ CalAmp

CalAmp F.A.Q.

Topics: | LMU-300 >> | LMU2720 >> | LMU 4225 >> | LMU-700 >> |

Description (Tracking And Telemetry Devices): | ATU-620 | LMU-1100 | TTU-700 | TTU-1200 | TTU-2820 |

Description (Fleet Tracking Units): | LMU-300 | LMU-400 | LMU-700 | LMU-800 | LMU-900 | LMU-1100 | LMU-1200 | LMU-2000 | LMU-2100 | LMU-2600 | LMU-2700 | LMU-3030 | LMU-4200 | LMU-4520 | LMU-5000 | MDT-7 |


Manuals / Instructions:

Useful information:


Dear friends, if you have any additional materials for the Calamp devices, please don't hesitate to add materials.
Best regards,
Evgeny Shatilo
Gurtam HW Developer
51

➤ CalAmp

Re: ➤ CalAmp

small_gprs wrote:

the price for the each unit is volume dependant, in America that model is sell around 100 usd and lowest each time, also you can use any brand supported by wialon, there is a lot out there, any of them need always time to learn,  good luck

Yes, volume discounts apply and this the 100 unit price, the CalAmp devices we still have with customers currently are legacy ones and they have had now for about 2 years.

The brands we had chosen to go with for the past years have done us very well and are competitive plus never had any issues or breakdowns..

Onwards and Upwards!!
Knowledge, data & information is power!
52

➤ CalAmp

Re: ➤ CalAmp

FleetPursuit wrote:

The brands we had chosen to go with for the past years have done us very well and are competitive plus never had any issues or breakdowns..

Congrats, the main issue is that Bussines keep going on.

--
Spread the AVL- World
53

➤ CalAmp

(edited by small_gprs 25/03/2017 05:31:06)

Re: ➤ CalAmp

Hi all, 

this is a classic LMU3030 but using BT as wireless iface, connect it to your Smartphone and allow SIM-LESS Communication right away

https://image.ibb.co/jNb53v/3030bt.png


complete datasheet here

--
Spread the AVL- World
54

➤ CalAmp

Re: ➤ CalAmp

mechatronica wrote:

Dear Evgeny

Here is a Calamp-Wialon question.  At now seems only voltage-type fuel level sensors are supported. But digital interface will provide better results and precision.  Several Wialon users want to use them, but we need to solve a simple problem.
Calamp LMU 2700 uses RS232 port for Text messaging. We have built a special firmware for Calamp and now LMU device receive volume value and send to Wialon. But in text field as "user_msg_1" parameter

Any chance to convert them to sensor value, for example : from "554" to 554?

Thanks!


EDIT : Now digital fuel level sensors are working with Calamp via RS232 interface

Hi

I have 1 Omnicomm 30160 Digital Fuel Level Sensor  can this work  with LMU devices?

Also: i have a Basic developed script that can works with Wialon with events like:

Ignition On

Ignition Of

External Battery Level

Internal Battery Level

Safe engine shutdown  (with comands included and events reported) (The device will only stop the engine if the unit is less than 15 kilometers per hour

Panic Button

Periodic Report with ignition Off

Periodic Report with External Battery removed.

Any Question PM.

Regards

55

➤ CalAmp

Re: ➤ CalAmp

Cesar Luis wrote:
mechatronica wrote:

Dear Evgeny

Here is a Calamp-Wialon question.  At now seems only voltage-type fuel level sensors are supported. But digital interface will provide better results and precision.  Several Wialon users want to use them, but we need to solve a simple problem.
Calamp LMU 2700 uses RS232 port for Text messaging. We have built a special firmware for Calamp and now LMU device receive volume value and send to Wialon. But in text field as "user_msg_1" parameter

Any chance to convert them to sensor value, for example : from "554" to 554?

Thanks!


EDIT : Now digital fuel level sensors are working with Calamp via RS232 interface

Hi

I have 1 Omnicomm 30160 Digital Fuel Level Sensor  can this work  with LMU devices?

Also: i have a Basic developed script that can works with Wialon with events like:

Ignition On

Ignition Of

External Battery Level

Internal Battery Level

Safe engine shutdown  (with comands included and events reported) (The device will only stop the engine if the unit is less than 15 kilometers per hour

Panic Button

Periodic Report with ignition Off

Periodic Report with External Battery removed.

Any Question PM.

Regards


Dear Cesar

Calamp can work with digital fuel level sensors via rs232 interface but most likely you will need to buy extra UART - RS232 interface , because Calamp serial interface has UART levels, while all fuel level sensors comply full RS232.

All types of fuel sensors : capacitive Eurosens Dominator, fuel flow meters Eurosens Direct, Eurosens Delta, ultrasonic level sensor Eurosens Dizzi
Новости о продукции Мехатроники https://forum.gurtam.com/viewtopic.php? … 43#p135643
56

➤ CalAmp

Re: ➤ CalAmp

Hello All,
My name is Paul from Indonesia. I am a new users of wialon. I use LMU 2720 device. This devices i bought with running configuration on it. I just change the inboud IP to make it pointing to wialon. I have some problem. So everytime the device goes  to basement it always sent last fix position including speed and number of sattelite.

Is there any parameter/s register that i can tune to make it sent last fix long,lat but speed =0 and number of sattelite =0, because current config give wrong monitoring info in wialon because the sattelite monitoring always give green color eventhough cirrently it is in basement (invalid gps)

57

➤ CalAmp

Re: ➤ CalAmp

Hi everyone,

AM looking for the correct calamp Sregister or parameter to set inorder to get my calamp units showing steadily online in wialon local. What happens now is that my unit comes online for 10minutes if I run the AT command AT$APP CLEAR LOG. After 10 minutes it shows offline until I run the AT command again. Am testing these units on the bench and cannot install it I get them showing online steadily.

Kindly help.

BR,

Bilal

58

➤ CalAmp

Re: ➤ CalAmp

muthama wrote:

Hi everyone,

AM looking for the correct calamp Sregister or parameter to set inorder to get my calamp units showing steadily online in wialon local. What happens now is that my unit comes online for 10minutes if I run the AT command AT$APP CLEAR LOG. After 10 minutes it shows offline until I run the AT command again. Am testing these units on the bench and cannot install it I get them showing online steadily.

Kindly help.

BR,

Bilal


Maybe you can write to us (hw@gurtam.com). In email please provide device models and send to us device script for checking. Thank you.

59

➤ CalAmp

Re: ➤ CalAmp

muthama wrote:

Hi everyone,

AM looking for the correct calamp Sregister or parameter to set inorder to get my calamp units showing steadily online in wialon local. What happens now is that my unit comes online for 10minutes if I run the AT command AT$APP CLEAR LOG. After 10 minutes it shows offline until I run the AT command again. Am testing these units on the bench and cannot install it I get them showing online steadily.

Kindly help.

BR,

Bilal


Set parameter 2313 (in seconds) to something between 30-180, this is the HB for keep the link with the carrier. Wialon recognize it well.

--
Spread the AVL- World
60

➤ CalAmp

Re: ➤ CalAmp

Por favor necesito la comfiguración para reportar cada 30 segundos con ign on y cada 5 minutos con ign off

small_gprs wrote:

Here is it a 15 Lines Minimalist ol' School AT script for any calamp devices

0.-AT$APP GPRS CONTEXT 0 "your_apn"    //APN
1.- AT$APP PPP USER "apn_username"                        
2.- AT$APP PPP PASSWORD "apn_pswd"                
3.- AT$APP INBOUND 193.193.165.165:port     // Port depends on LMU model, pls see  http://gurtam.com/en/hw-manufacturers/calamp                  
4.- AT$APP PARAM 262,0,30                    //Time Distance Profile 0 (Time=30 secs)
5.- AT$APP PARAM 263,0,800                    //Time Distance Profile 0  (Distance=800m )
6.- AT$APP PARAM 264,0,60                    //Time Distance Profile 0  (Heading=60є)
7.- AT$APP PARAM 265,1,900                    //Timer 1 = 15 min for reports when unit off
8.- AT$APP PARAM 512,0,3,0,0,0,7,0,0,0      // Start  time-distance profile 0 on reset  OR power up
9.- AT$APP PARAM 512,1,16,0,0,0,6,0,0,0     // When Ignition off stop actual profile running
10.-AT$APP PARAM 512,2,16,0,0,0,13,1,0,0   // When Ignition off start timer 1 ()
11.-AT$APP PARAM 512,3,18,1,0,0,1,10,0,0    // When timer ran out send report (EVcode 10) Unit off reports
12.-AT$APP PARAM 512,4,17,0,0,0,1,11,0,0     // When Time-Distance updates send report (EVcode 11) Unit on reports
13.-AT$APP PARAM 512,5,16,0,0,0,1,12,0,0     // Send EVcode 12 when Ignition Off
14.- AT$APP PARAM 512,6,15,0,0,0,1,13,0,0      // Send EVcode 13 when Ignition On

Event Codes
10 Reports when Unit is Off (parking)
11 Reports when Unit is Moving
12 Ignition Off
13 Ignition On


Hope can be useful !!

Sine Tecnologías
61

➤ CalAmp

Re: ➤ CalAmp

That AT Script can work modifying line 7 as

AT$APP PARAM 265,300


Ignition ON time was already set to 30 secs

--
Spread the AVL- World
62

➤ CalAmp

Re: ➤ CalAmp

tienes los comandos para ajustar vía SMS


sinetecnologias wrote:

Por favor necesito la comfiguración para reportar cada 30 segundos con ign on y cada 5 minutos con ign off

small_gprs wrote:

Here is it a 15 Lines Minimalist ol' School AT script for any calamp devices

0.-AT$APP GPRS CONTEXT 0 "your_apn"    //APN
1.- AT$APP PPP USER "apn_username"                        
2.- AT$APP PPP PASSWORD "apn_pswd"                
3.- AT$APP INBOUND 193.193.165.165:port     // Port depends on LMU model, pls see  http://gurtam.com/en/hw-manufacturers/calamp                  
4.- AT$APP PARAM 262,0,30                    //Time Distance Profile 0 (Time=30 secs)
5.- AT$APP PARAM 263,0,800                    //Time Distance Profile 0  (Distance=800m )
6.- AT$APP PARAM 264,0,60                    //Time Distance Profile 0  (Heading=60є)
7.- AT$APP PARAM 265,1,900                    //Timer 1 = 15 min for reports when unit off
8.- AT$APP PARAM 512,0,3,0,0,0,7,0,0,0      // Start  time-distance profile 0 on reset  OR power up
9.- AT$APP PARAM 512,1,16,0,0,0,6,0,0,0     // When Ignition off stop actual profile running
10.-AT$APP PARAM 512,2,16,0,0,0,13,1,0,0   // When Ignition off start timer 1 ()
11.-AT$APP PARAM 512,3,18,1,0,0,1,10,0,0    // When timer ran out send report (EVcode 10) Unit off reports
12.-AT$APP PARAM 512,4,17,0,0,0,1,11,0,0     // When Time-Distance updates send report (EVcode 11) Unit on reports
13.-AT$APP PARAM 512,5,16,0,0,0,1,12,0,0     // Send EVcode 12 when Ignition Off
14.- AT$APP PARAM 512,6,15,0,0,0,1,13,0,0      // Send EVcode 13 when Ignition On

Event Codes
10 Reports when Unit is Off (parking)
11 Reports when Unit is Moving
12 Ignition Off
13 Ignition On


Hope can be useful !!

Lps Trackers
63

➤ CalAmp

Re: ➤ CalAmp

SMS what for

--
Spread the AVL- World