1

Commands channel

Тема: Commands channel

Hello,

http://prntscr.com/ifhlkq

why is not set just AUTO like TCP / UDP / SMS / "no gprs" ¿¿

I mean, here is telling me: if device is on GPRS put "auto" if device is not on GPRS put "virtual".

How do I know that they are connected to gprs or not?

Support tells me "if it is set in Virtual, and device is on gprs, it will not work".

¿?¿?¿? I do not understand sorry...

my request: add virtual mode to "automatic"

thanks

Locating things
2

Commands channel

Re: Commands channel

Pablo,
if device is connected you can see in the monitoring tab on commands that it says a green "gprs"

But virtual commands really not stable... and you can store only one command, if you add new command and old command not set = old command overwritten...

But i have also no idea how to do it better!

So for devices where we need to send automaticaly commands we let them not go to sleep mode and have them always send data

Wolf.

Politeness dictates it to write his name on a post
3

Commands channel

Re: Commands channel

I set devices to send every 1 min (stop/moving).

commands are sent 9.00h. and 19 h. so it should be ok....

why not option to set same channels in one?

Thanks

Locating things
4

Commands channel

Re: Commands channel

You can use flespi as middleware between devices and Wialon. In flespi commands are delivered by GPRS once device is connected and identified. You also have possibility to manage list of pending commands.

At the dark side of telematics...
5

Commands channel

Re: Commands channel

Hi, we are short of resources to use flespi. not an option in our case...

Locating things
6

Commands channel

Re: Commands channel

It is 10 minutes work. But up to you of course.

At the dark side of telematics...
7

Commands channel

Re: Commands channel

mmmmm
any manual?

Locating things
8

Commands channel

Re: Commands channel

locationGPS, sure, follow the link above.

At the dark side of telematics...
9

Commands channel

Re: Commands channel

ok, I will do it...seems interesting..

Locating things
10

Commands channel

Re: Commands channel

where should be this' http://prntscr.com/ihj841

Locating things
11

Commands channel

Re: Commands channel

Here is workflow. Configuration button and commands availability depends on the device and protocol. You can explore list of settings commands available for each device type in devices and additional commands available for management(the subject of this thread) at protocols.

At the dark side of telematics...