1

max request per seconds

Topic: max request per seconds

hello
is there any limit for sending pocket from a device?
for example can i send 10 pocket per second from a device or from a ip !?

2

max request per seconds

Re: max request per seconds

cant see any restrictions here: http://docs.gurtam.com/en/hosting/req/req

As i remember events to Browser are send 4x per second, so sending 10x per second makes not really sence.

And there is a 10 Mio Messages limit in Reports, so you can request only reports for ca. 11 days if sending 24/7 to get blocked with 10 Mio messages :-)

For realtime tracking you also have
-- Delay in data calculation in gps tracker
-- 200-700 ms delay in gprs signal
-- from my experience a delay of a few seconds in the whole Wialon processing.

So it would be realy interesting for what you want to send 10 locations per second...

Wolf.

Politeness dictates it to write his name on a post
3

max request per seconds

Re: max request per seconds

wwbusch aka Buwo wrote:

-- Delay in data calculation in gps tracker

i asked because i have a transaction server in my side
i receive data from about 2000 device and save them to my local database
then i send them to wialon
my tracker sent location every 30 second
so i have about 70 pocket to send to gurtam every seconds! smile

4

max request per seconds

Re: max request per seconds

ok
now i see there are a 0.5 sec delay for a new request
so
how can i avoid limit or increase the request per seconds!?

5

max request per seconds

Re: max request per seconds

Roozgar,

i think you should clarify that a bit more:

If you forward the data of 2000 units to 2000 units in Wialon, that should be no problem (if i understand the limitations correct).
(many providers are bundling a few IPV4 adresses and have millions of devices behind that NAT... so i am sure that Wialon can handle that).

And as you pay than for 2000 units in Wialon, i am sure that support@gurtam.com will help you ASAP with your task.
If you want to send 2000 units from your database into 1 Unit in Wialon i am sure there are some limitations...

Wolf.

Politeness dictates it to write his name on a post
6

max request per seconds

Re: max request per seconds

wwbusch aka Buwo wrote:

Roozgar,

i think you should clarify that a bit more:

If you forward the data of 2000 units to 2000 units in Wialon, that should be no problem (if i understand the limitations correct).
(many providers are bundling a few IPV4 adresses and have millions of devices behind that NAT... so i am sure that Wialon can handle that).

And as you pay than for 2000 units in Wialon, i am sure that support@gurtam.com will help you ASAP with your task.
If you want to send 2000 units from your database into 1 Unit in Wialon i am sure there are some limitations...

Wolf.

each tracker hardware send data to its own unit in wialon
so
as you explained this dont face any limitation!!

Thank you for your informationn