1

Xeelectech XE209C

(16/02/2016 12:11:12 отредактировано rambo)

Тема: Xeelectech XE209C

Hello everyone !
All our products LK206  LK109 LK106 LK209BC  XE108 XE101 XE102 XE103 LK208  LK210 XE201 XE209B/C ... can be supported by Port Xeelectech XE209 .

2

Xeelectech XE209C

(17/06/2016 07:52:32 отредактировано rambo)

Re: Xeelectech XE209C

Alarm  setting !!!

The parameter "vehicle_status" FFFFFBFF is the bitwise parameter. The value of each alarm can be accessed by using bitwise controls. Here is the link to the documentation for bitwise control http://docs.wialon.com/en/hosting/cms/u … sors/param
so  you need the drop Alarm function , please creat the Drop alarm sensor with parameter  tr_status:2
the SOS =  drop Alam !!
tr_status:20   power  on/off

3

Xeelectech XE209C

Re: Xeelectech XE209C

Good day ... I wonder what the parameter to be inserted to block fuel via TCP GPRS? What command please?

4

Xeelectech XE209C

Re: Xeelectech XE209C

techtrackrastreamento It depends on the equipment  connection scheme (there many ways to block the engine)
Also pay attetion, athat bloking the engine by remote command can be dangerous.

Viktor Yarovenko
Hardware department Specialist
5

Xeelectech XE209C

Re: Xeelectech XE209C

what parameters do i set on the LK206 on wialon platform for panic sos & iginition alerts

6

Xeelectech XE209C

Re: Xeelectech XE209C

evanirungu Ignition is tr_status:11 or tr_status:14

Panic button -- messages should be red by default.
If you have more questions -- pleas ask hw@gurtam.com

Viktor Yarovenko
Hardware department Specialist
7

Xeelectech XE209C

Re: Xeelectech XE209C

Thanks i have been able to set for the ignition but panic still has an issue

8

Xeelectech XE209C

Re: Xeelectech XE209C

As you can see the answer of manufecturer:


rambo пишет:

Drop alarm sensor with parameter  tr_status:2
the SOS =  drop Alam !!

Viktor Yarovenko
Hardware department Specialist
9

Xeelectech XE209C

Re: Xeelectech XE209C

I dont know why the LK206 parameters for panic are tricky to set