1

Bofan PT502

Тема: Bofan PT502

Hello everyone,

Kindly  anyone can help me on integrating Bofan PT502 vehicle tracker to  Wialon i have done everything as per the configuration from manufacturer but i cant get device online ,

I see on Device list its supported and around 100 registered on platform

http://gurtam.com/en/gps_tracking/gps_h … id=7406446

Kindly

2

Bofan PT502

Re: Bofan PT502

stevewangara

have you been able to set the proper APN and IP/port settings? Does your device accept and answer SMS-commands? Check the sim-card data availability and specify the unit ID to check logs on our end. Take a look at wires as well, try to test it outside with the proper power connection and GPS-availability.

Business Development Manager
Gurtam
3

Bofan PT502

Re: Bofan PT502

Hello

Yes i can get all the info

I have  done this now

000000SVR.212.98.173.204,20754 NOW

000000SVR,212.98.173.204,20754 before .

I have changed from Comma to Dot when setting up the Server was given as test device.

Regards
Steve

4

Bofan PT502

Re: Bofan PT502

stevewangara

Was it for Wialon Hosting? The right IP for the latter is 193.193.165.165.

Business Development Manager
Gurtam
5

Bofan PT502

Re: Bofan PT502

Hello

My device is working now

I used 000000SVR193.193.165.165

Before I was putting 000000SVR,193 or 000000SVR.193....

Many thanks

I am becoming expert day by day smile

Regards

Steve

6

Bofan PT502

Re: Bofan PT502

hi Steve,

i also recommend reading the Documents on http://docs.wialon.com/en/hosting/ regulary from the top to buttom a few times !

And if you have questions --> Forum :-)

Wolf.

Politeness dictates it to write his name on a post
7

Bofan PT502

Re: Bofan PT502

hello,

i have connected the pt502 on server and the communication was success.
the problem is with time interval for Sending GPRS Packet.
I have used the following commands :

000000GTI30,0,0,0,240
000000GTI30,0,0,0,0
000000GTI30,300,30,0,240

and doesn’t work.
I receive data only when i send the sms command or when I start the car.
The ignition sensor (yellow wire) is connected.
Does any one know what can be the problem?