Teltonika FM1100

hi,

Here is the answer:

Q: We have our server and we are testing iButton, ID on iButton is 79000015BFD23001, but on server we see other value 85800111052947580, how to convert it?

A: iButton ID is devided in 8 bytes and bytes are sent starting from 1st to 8th:

ID on iButton:

79000015BFD23001 <--

79 00 00 15 BF D2 30 01

Readed value:

01 30 D2 BF 15 00 00 79

This is the answer from the Teltonika guy's

regards

Baltika

Hi, Baltika

The option "Reverse ibutton" is set on the unit properties near the device type (additional button)
On the right of the entry field there is a button which can be used to configure device parameters for the given unit:
http://docs.gurtam.com/en/hosting/cms/units/general

If in your Wilaon Pro this option doesn't exist please write to support@gurtam.com we send your a updated scipts. (for Wilaon Pro 1106 )

Hi Guys,

just want to let you know, that T made a working "Private Mode" Function for us in FM11.

For those guys who has problems with their datasecurity officers...

So now "employee" can connect switch on DIN2 and if DIN2=1, device will not SAVE and SEND any data. If DIN2=0 device works absolutely like normal.

So if you need this function please ask your local sales guy from T.

Wolf.

Hi Chris,

yes its a firmware made for us (and costed a lot :-)... you need to ask your local dealer for it :-)
by the way, Ruptela wrote me, that this function is already implemented in their standard firmware which is for free. (just to be fair)

Wolf.

Edit: ups, i did not ask your full question... if DIN2=1, no data is saved / collected / send, if DIN2=0, standard functionality.
(i think they did in sourcecode something like
WHILE new_data_to_be_collected_function
   IF DIN2=1 do nothing
   ELSE do what you do normaly
END WHILE

so 750.-€ per line of source code payed :-))

Делал неоднократно это делали. У вас просто видимо не срабатывает из-за не правильной команды или еще чего-то

Hi .
As principal you need to hold TCP connection to enable sending TCP commands.
Look for hold coonection in the Teltonika setup. define heartbeat to 5  minuts.
Hope it will help.
I know it from other Teltonika models.
koby.

Last one I have is FM11010720.e

Hi Guys,

i am also since 3 hours here trying to get it working.
i always get #ERROR message.

John, hope you did not forgett username/password?

i testet with (sample) "hill 12345 getversion"

So maybe Gurtam Support can tell us something about how a custom command need to look like?

Wolf.

i got today the info from teltonika sales guy (hi Stanislavas ;-) that the new firmware versions does not support any gprs remote configuration by other plattforms then their own plattform. So if you buy new Teltonika HW you should beware of this!

(and i cancel my plans to do my "automatic private mode" via commands and wait that "The Geniuses" (tm) will implement it in Wiaon.

Wolf aka Buwo

Wolf is there a new configurator for your version?

Вышлете пожалуйста последний конфигуратор и прошивку на 1100   shizko@mail.ru

Hi , MaryTudor

When you send sms command to config your fm1100 . It's reply all parameter is change ?
if anything is done . may be you need to config network operator code .